Need Support? Let’s guide you to the right answer or agent.

OpenRail Ideas Portal

ADD A NEW IDEA

Applications

Showing 100

Cant Customizable Parameters and Improved Navigation

I have a couple of issues with this 1 when you edit the cants its slow and the curser always jumps back to the top of the page, you cant simply go to the next line down 2 none of the automated cants are ever suitable. I'd like to be able to add in...
2 days ago in CANT / OpenRail Designer 0 Needs review

For steel beams- When we create stiffeners and use them in cross frame definition, regardless of the method used, the stiffener tables when opened default to the first stiffener in the OBM library rather than the stiffener used in cross frame definition

Currently when we create a new stiffener and then when we create cross frames using those stiffeners, they don't show up when you open stiffener definition after creating cross frames (the first stiffener definition within the selection is shown)
7 days ago in OpenBridge Modeler 0 Needs review

Option to add support settlement to Leap Concrete & Leap Steel

Differential support settlement can create additional internal forces in beams. Right now there is no option to account for those forces.
28 days ago in OpenBridge Designer 0 Needs review

More types of bridges needed

The software is capable of quickly performing conceptual design, but currently supports very few bridge types, which cannot meet the needs for scheme presentation. Could you please add cable-stayed bridges, and suspension bridges? Also, provide se...
about 1 month ago in OpenRail ConceptStation / OpenRoads ConceptStation 0 Needs review

Modify the LLS part when placing a turnout.

Currently one could add an LLS part on a turnout. Unfortunately this is a standard value. Sometimes, when creating a horizontal geometry, it is necessary to ''shorten'' the LLS part (aka to place a fewer amount of long sleepers that a standard LLS...
about 1 month ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Create a tool that constructs transitions between different types of rail sections

Sometimes in track design, one must use different types of rails, say 60kg and 50kg rails. One could weld them and grind them together but this is a crude method. In Sweden they use what is called a transition rail, which in principle contain a sm...
about 1 month ago in Modeling / OpenRail Designer 0 Needs review

Designing Geometry using multiple spiral type

Currently we can set up one spiral type for one DGN. If the geometry needs to be designed using different spiral type, we need the flexibility to allow the application of multiple spiral type in one DGN
about 1 month ago in Geometry / OpenRail Designer 0 Needs review

Measure rail interval similar to Pro Rail extension

In Bentley Rail Track, there was an extension called Pro Rail that allows users to measure the interval between rail dynamically. Right now, we are able to report that using Station-Offset report but we are not able to track it which makes it chal...
about 1 month ago in OpenRail Designer 0 Needs review

Verify Turnout

Use the Geometry Connector with start and end elements chosen as turnouts. The converged result gives a disconnection between the regression alignment and the turnout. You can only discover it by zooming in to the closest possible view. A "Verify ...
2 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

When exporting to the IFC, keep a different identification for each item.

When exporting the IFC, each element is identified by a default value. For example, all solids come out with an identification as smartsolid. This makes it very difficult to search for an element in the model.
2 months ago in Import/Export / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer 3 Needs review