Need Support? Let’s guide you to the right answer or agent.

OpenRail Ideas Portal

ADD A NEW IDEA

Regression Analysis

Showing 12 of 1410

Point Code and number included in the regression points

The point code and number should be included in the regression points so that it can be printed out and identified when you make a regression report. If you only see the stationing and offset from the geometry you cannot separate normal track poin...
about 2 months ago in OpenRail Designer / Regression Analysis 0 Needs review

Gauge and Cant Reports on Regression Information

Based on the way the new regression tools work for importing regression lines we no longer have a way of running gauge and cant reports on existing alignments based on LHR/RHR surveys.
8 months ago in CANT / OpenRail Designer / Regression Analysis / Reports 0 Future consideration

Horizontal and vertical regression values displayed in mm

Reporting horizontal slues and vertical lift/lowers interactively in the plan or profile model always displays as per the working unit, which I have set to metres. It would be useful to display these values in millimetres
about 2 years ago in Regression Analysis 0 Planned

The Regression Tool need to be able to use or at least tie to Survey points.

The Regression Tool need to be able to use or at least tie to Survey points. I should be able to use Survey points in a DGN and in a reference. I need to have the survey points that are used in the regression appear in the regression report so tha...
over 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Regression Analysis 0 Future consideration

Regression: existing cant units

In the same way we introduced slew and lift/lower unites, we should be able to define cant units in the Design File Settings>Civil Formatting. And it should be use by the "Show Existing cant" capability we can set in the Preferences
6 months ago in Regression Analysis 0 Future consideration

The use of regression line/points to report lift information in profiles

Currently there is not functionality to annotated lift information using regression line/points. Have you use another design alignment (in this case it would the exisitng alignment). It would be great to be able to use one data source to report sl...
almost 2 years ago in OpenRoads Designer / Regression Analysis 0 Future consideration

Coupling between horizontal and vertical regrerssion lines

A very problematic area is the coupling between horizontal and vertical regression analysis. Generally speaking, one must create a horizontal regression line first, create regressed elements, couple them together in a complex geometry and then pro...
over 1 year ago in OpenRail Designer / Regression Analysis 0 Future consideration

LIFT vrs slew report

Hi would be very helpful to get a lift vrs Slew report at set chainages along an alignment. This would help the designer see if they are designing enough lift in the track to achieve the slews, without going to the drawing production stage
almost 2 years ago in OpenRail Designer / Regression Analysis 0 Future consideration

Quick Horizontal Regression by Slew

The ability to have a tool or a checkbox that lets you run a quick horizontal regression for the alignment that is entirely controlled by the slew value input and not a 'tolerance' value. This would make the quick horizontal regression tool much m...
over 1 year ago in OpenRail Designer / Regression Analysis 0 Future consideration

Regression Management Tools

Options within the software for managing imported regression points in line with the tolls we previously had in powerRail Track.
8 months ago in OpenRail Designer / Regression Analysis 0 Future consideration