It would be good to add to the OBM library, for example standard abutments types used in the UK that are not integral and need an abutment gallery to align with the CIRIA C543 Bridge detailing guide.

Lost functionality that was available in Geopak. Helpful to meet specific locations when designing a profile, instead of storing the profile and reading the profile report, or hand calculation of the low and high points.

Please add functions to Design/model special structure like L shape retaining wall with/without fence on top, pile with/without cap and Beam supported retaining wall etc. Attribute for setting those structure would be wall height, thickness, found...

In InRoads there was an option to import data as depths instead of elevations. This is common practice for hydrographic data, as many dedicated programs have positive elevations being below 0, with elevations above as negatives. ASCII files can be...

Currently The Profile Offset Transition tool allows Distance parameter to select Start and the End of the profile offset element. But this causes some issues with the station of the offset profile if there is a gap at the beginning of the original...

Currently, any substructure design that is created from LeapBridge Steel (LBS) is stored directly in the OpenBridge Designer (OBD) file. To allow multiple people to work on a project at once, it would be easier to have a save as option in LBS Subs...

Currently "Create 3D by Drape" tool does not support point elements/ zero length elements. The modify point and drape element tool also does not work for zero length elements. Kindly add the support for zero length elements in "Create 3D by Drape ...

The project is done without any geocoordinates and there is need to shift the overall project datum. currently the option to shift the model vertical elevation/ datum is not available. For Example, the original model done is at el. 16'...but need ...

Currently When importing pulling in pipe networks (both utility and drainage) two things happen 1.) They lose a lot of data. 2.) you can only do it once. Then you have to erase EVERYTHING and do it again. The workflow generally goes like this: So ...

Add/Update the dimensioning tools in SignCAD to align with ORD's DimensionStyles toolbox. This will reduce post-processing (as in re-doing the dimensions and info blurb to match arrow styles) after placing the sign.sgn in ORD.