Need Support? Let’s guide you to the right answer or agent.

OpenRail Ideas Portal

ADD A NEW IDEA

Applications

Showing 95

Choose whether imported geometry will follow terrain model or corridor profile

I observed that when one imports a geometry from OpenRail designer WITHOUT profile, Concept Station tends to create a profile on the basis of the terrain model. However, there are cases when it is better for the program to follow a corridor profil...
about 1 year ago in OpenRail ConceptStation 0 Needs review

Need to annotate partial alignment lengths along turnout from point of switch to start/end

Users need a way to annotate the same way SS2 would annotate with the Switch Height Plan command. Partial lengths along the alignment need to be annotated, but there is not a way to do this in OpenRail. The workaround is to create a dummy alignmen...
about 1 year ago in Annotation / OpenRail Designer / Turnouts/Crossings 0 Needs review

Allow for profile annotations to use the profile exaggeration

Please add the capability for profile annotations to use the exaggeration set in the profile model view. This would allow for annotations to better fit a profile that has been exaggerated
about 1 year ago in OpenRail Designer 0 Needs review

Stepped Footing

Add option for Steeped footing in Leap Concrete - Substructure Module
over 1 year ago in OpenBridge Designer 1 Needs review

Utility Overhead Conduits- Need Vertical Sag

Can the Overhead conduits be set to apply "sag " curves for models in 3D? which means, we will need to include vertical curves when placing them between 2 nodes (eg. poles); In a real world, the conduits typically have some sag, and not as straigh...
over 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Needs review

Create crossections from a text file

We receive hand note with measurements along the track and at time we need to draw hundreds of crossection. Previously in BRT SS2
over 1 year ago in OpenRail Designer 2 Needs review

Template Creation window access ProjectWise datasource to load xml template libraries from another project

Provide a ProjectWise datasource connection to the OBM Template Creation window to open a "Select Document" dialog. The OBM Template Creation window is unable to OPEN another XML from ProjectWise - Open dialog is currently limited to Windows File ...
over 1 year ago in OpenBridge Modeler 0 Needs review

Add ability for Custom Line Style to place point feature on the curve in survey

The user has created a line style that just shows the points (Begin, End, and Vertices). The line works fine with a straight line but does not show vertices along a curve. The line style is used in the Survey for the center line data shots. If the...
over 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 1 Needs review

Allow member groups to start and stop at the same support line in LBS

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
over 1 year ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Bridge centerline

It will be very helpful if OBM can project the deck centerline along the length of the bridge.
over 1 year ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review