Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

OpenBridge Modeler

Showing 22

Add a negative function into longitudinal/transverse offsets

Greater flexibility for wingwall placement
about 2 years ago in Geometry / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Place one bearing at pier location for continuous span concrete girder bridge design

Ability to place only one bearing at pier location for continuous span concrete girder bridge design, two girders shearing one bearing at pier location.
about 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Modeling horizontal bracing for steel girder bridge

I believe OpenBridge modeler missing function to place horizontal bracing between girders (angle or CHS member) CHS preferable.
about 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Openbridge: add the ability to have curved abutment and or curved retaining wall

Openbridge: add the ability to have curved abutment and or curved retaining wall
over 2 years ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Simplifying Retaining Wall Construction: A Wingwall-Inspired Approach for Bridge Design

When the bridge needs a long “wingwall”, it break two part – a wingwall which is built with the abutment, and the rest part I call it “Retaining wall”. Is it possibly to make this retaining wall as easy as wingwall? That means like put the wingwal...
24 days ago in OpenBridge Modeler 0 Needs review

Add support for multiple piers/abutments on the same support line

This will be very useful for bridge widening projects. Also, consider that the support will have gaps and overlaps between supports.
6 months ago in OpenBridge Modeler 0 Needs review

Permanent bracing (PPC girders)

This would give us the ability to make our models more complete within OBM rather than having to either model using MicroStation tools or another software (ProStructures).
8 months ago in Modeling / OpenBridge Modeler 0 Needs review

Template Creation window access ProjectWise datasource to load xml template libraries from another project

Provide a ProjectWise datasource connection to the OBM Template Creation window to open a "Select Document" dialog. The OBM Template Creation window is unable to OPEN another XML from ProjectWise - Open dialog is currently limited to Windows File ...
over 1 year ago in OpenBridge Modeler 0 Needs review

Allow member groups to start and stop at the same support line in LBS

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
over 1 year ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Bridge centerline

It will be very helpful if OBM can project the deck centerline along the length of the bridge.
over 1 year ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review