Need Support? Let’s guide you to the right answer or agent.

OpenRail Ideas Portal

ADD A NEW IDEA

OpenRoads Designer

Showing 847

Create corridor from reference feature

Our current standard workflow for roadway corridor modeling is to create a pavement corridor then a corridor for each end condition Rt and Lt. I have seen many others including some Bentley folks use this method. It would be big time saver to have...
about 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer 2 Future consideration

Update "Coordinate Grid" tool to allow more options

The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves

In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
about 2 years ago in OpenRoads Designer 0 Future consideration

Creating Generic Curb Offsets

I would like to create a generic curb for airborne lidar extraction with a 0.5 ft vertical offset from the gutter to the top of curb and then a 0.5 ft horizontal offset from the top of curb to the back of curb. I would want to collect the gutter a...
about 2 years ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

Put the DEPTH point type back in the survey import

In InRoads there was an option to import data as depths instead of elevations. This is common practice for hydrographic data, as many dedicated programs have positive elevations being below 0, with elevations above as negatives. ASCII files can be...
over 1 year ago in Import/Export / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Add support for Points/ Zero length elements using "Create 3D by Drape" tool

Currently "Create 3D by Drape" tool does not support point elements/ zero length elements. The modify point and drape element tool also does not work for zero length elements. Kindly add the support for zero length elements in "Create 3D by Drape ...
over 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Add Ability to move the vertical datum

The project is done without any geocoordinates and there is need to shift the overall project datum. currently the option to shift the model vertical elevation/ datum is not available. For Example, the original model done is at el. 16'...but need ...
over 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Ability to Update/Load additional Pipe networks from Civil 3d

Currently When importing pulling in pipe networks (both utility and drainage) two things happen 1.) They lose a lot of data. 2.) you can only do it once. Then you have to erase EVERYTHING and do it again. The workflow generally goes like this: So ...
over 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

Use of vertical alignment commands from geometry when creating the vertical alignment of utilities

Currently to get a specific vertical alignment on utilities it is quite difficult
over 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Grid Text Rotated with Tick under Plan Grid Annotation

In Plan Grid annotation, grid texts (northing and easting) can only rotate or oriented with the view of drawing model but NOT able to rotated with the tick mark (+) or grid line.
over 1 year ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration