The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...

I want to show in our corridor models the areas where we are using erosion control measures vs using general seeding. Currently, the only real way to make this distinction is to either create a new template that uses a different feature definition...

Need the ability to hide ".00" decimal for stationing using the trailing zeros setting. For example, station 100+00.00 would label 100+00. This is available for point offset and I've attached a screenshot of the settings needed.

Corridor report does not subtract the volume of sleepers we added to the model from the ballast. I propose to add in the next version of ORD the possibility to subtract in the ballast the added sleepers.

The "Create Rails" tool utilizes the Rail Settings within the Design File. The gage lines are generated correctly based on the file settings, and so are the center of rail head lines, BUT these do not necessarily match the Template that is used to...

It would be good to add to the OBM library, for example standard abutments types used in the UK that are not integral and need an abutment gallery to align with the CIRIA C543 Bridge detailing guide.

OpenRail Designer seems to have Japanese Sine spiral type added from the formula used in Power RailTrack. However, there seems to be nothing similar to Japanese Cubic Parabola, which is based on a different formula from Japanese Sine.

In InRoads there was an option to import data as depths instead of elevations. This is common practice for hydrographic data, as many dedicated programs have positive elevations being below 0, with elevations above as negatives. ASCII files can be...

Currently, any substructure design that is created from LeapBridge Steel (LBS) is stored directly in the OpenBridge Designer (OBD) file. To allow multiple people to work on a project at once, it would be easier to have a save as option in LBS Subs...

Lost functionality that was available in Geopak. Helpful to meet specific locations when designing a profile, instead of storing the profile and reading the profile report, or hand calculation of the low and high points.