I would highly recommend to let user to snap to arc or spiral end in profile design. As you can see in the attached video I can't find intersection between profile alignment and vertical line that indicates arc/spiral end. To find intersection b...

My state agency commonly uses gutters with a 4% cross slope. The maximum superelevation rate is 7%. The gutter slope stays at 4% in this situation. Spread does not compute in this scenario because "A depressed gutter must have a Gutter Cross Slope...

We often want to show the location of cross section in plan which can be done using the named Boundary Lines but they need to be annotated so you know what each represents e.g. stations/chainages or section names such as letters etc. There is a wo...

Currently, Drainage and Utilities feature definitions get captured via the CIVIL_CONTENTMANAGEMENTDGNLIBLIST variable within the workspace. Many configurations often use wildcards and file names that lump together features of D&U with road, ra...

Currently, when secondary alignments are used, the cross sections are always based perpendicular to the primary alignment. We need the ability for named boundaries (or some other means of creating multi-point cross sections) to understand when sec...

When you create earthwork, there is a way to create an additional quantities for rock excavation and unsuitable material. We are wanting to be able to run the earthwork EAV report to have those quantities in EAV format, and then be able to annotat...

For our DOT, we need to show profiles for driveways. Since they are not large, it is expected to have 4 or more to a single sheet. In the current workflow, creating the drawing models and moving the drawing models to sheets to make this work is ti...

Currently our DOT requires that if ROW lines (or any element in the corridor) are outside the width of the default XS width, the user needs to create an extension or split the XS's to be able to show all design elements and ROW labels. Currently t...

Currently when the control - profile, alignment, feature - can't be found due to a deletion or reference detachment, the corresponding point control(s) is removed from the corridor. Considering that these events may occur inadvertently and not dis...

When a corridor clip is applied, the 2D geometry is not affected by that corridor clip, only the 3d mesh is clipped. I would like an option to choose whether you'd also like to clip the 2D geometry.