Need Support? Let’s guide you to the right answer or agent.

OpenRail Ideas Portal

ADD A NEW IDEA

Functional Areas

Showing 941

Numerical display for applied cant

Recommended that a when using the cross-section tool to view the applied cant along the alignment, the tool displays the cant as numerical value on the cross-section. The number should be generated automatically and displayed next the chainage...
over 1 year ago in CANT / OpenRail Designer 0 Future consideration

Use GAGE instead of Center of Railhead for Template Placement when Creating Rails

The "Create Rails" tool utilizes the Rail Settings within the Design File. The gage lines are generated correctly based on the file settings, and so are the center of rail head lines, BUT these do not necessarily match the Template that is used to...
over 1 year ago in Modeling / OpenRail Designer 0 Future consideration

Creating Generic Curb Offsets

I would like to create a generic curb for airborne lidar extraction with a 0.5 ft vertical offset from the gutter to the top of curb and then a 0.5 ft horizontal offset from the top of curb to the back of curb. I would want to collect the gutter a...
about 2 years ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

Include common support structure types used in the UK

It would be good to add to the OBM library, for example standard abutments types used in the UK that are not integral and need an abutment gallery to align with the CIRIA C543 Bridge detailing guide.
over 1 year ago in OpenBridge Modeler / Workspace 0 Future consideration

Put the DEPTH point type back in the survey import

In InRoads there was an option to import data as depths instead of elevations. This is common practice for hydrographic data, as many dedicated programs have positive elevations being below 0, with elevations above as negatives. ASCII files can be...
over 1 year ago in Import/Export / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Save LeapBridge Concrete design that is exported from LeapBridge Steel

Currently, any substructure design that is created from LeapBridge Steel (LBS) is stored directly in the OpenBridge Designer (OBD) file. To allow multiple people to work on a project at once, it would be easier to have a save as option in LBS Subs...
over 1 year ago in Import/Export / OpenBridge Designer 0 Future consideration

Add Ability to move the vertical datum

The project is done without any geocoordinates and there is need to shift the overall project datum. currently the option to shift the model vertical elevation/ datum is not available. For Example, the original model done is at el. 16'...but need ...
over 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Ability to Update/Load additional Pipe networks from Civil 3d

Currently When importing pulling in pipe networks (both utility and drainage) two things happen 1.) They lose a lot of data. 2.) you can only do it once. Then you have to erase EVERYTHING and do it again. The workflow generally goes like this: So ...
over 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration

Option to set station limits while creating Curvature Diagram.

I want option to set a station limits while creating Curvature Diagram so that we can focus on a very specific area instead of the whole geometry.
about 2 years ago in Geometry / OpenRail Designer 1 Future consideration

Use of vertical alignment commands from geometry when creating the vertical alignment of utilities

Currently to get a specific vertical alignment on utilities it is quite difficult
over 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration