Need Support? Let’s guide you to the right answer or agent.

OpenRail Ideas Portal

ADD A NEW IDEA

All ideas

Showing 120

Civil view Settings (Drainage and utilities) in Personal Preference

Have the Civil preference for drainage and utilities as file setting rather than personal preference. There are times we had to change the settings depends on what we are designing. eg. we want to show connecting conduit if we do drainage, not whe...
4 months ago in Drainage and Utilities 0 Needs review

Add support for slope manipulator in profile when the "Use Construction Length and Slop" Preference = True

when the "Use Construction Length and Slope" Preference = True", in the profile view the slopes can not be edited. c If the "Use Construction Length and Slope" Preference is set to False, We can edit the slope value directly in the profile. Please...
8 months ago in Drainage and Utilities 0 Needs review

When exporting to the IFC, keep a different identification for each item.

When exporting the IFC, each element is identified by a default value. For example, all solids come out with an identification as smartsolid. This makes it very difficult to search for an element in the model.
about 1 month ago in Import/Export / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer 3 Needs review

Develop and Annotate Partial Geometry

In my experience, it's common to tie a proposed vertical alignment into an existing vertical curve. This can be easily done with the geometry tools. However, the annotation is only drawn to where the proposed geometry terminates. While technically...
19 days ago in Annotation / Geometry 1 Needs review

Enhancement::Additional Tool for Design of Cross over connection between Tangent & Canted Tracks

I suggest improvements to Bentley OpenRail Designer for handling Cross over connections in the following scenarios: Cross over Between Adjacent Tangent Tracks: Enable a simple geometric connection between two parallel tracks without the use of Geo...
6 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Enhancement to Add a Selection Set Capability to the Graphics tool (Survey >> Field Book >> Import)

The Graphics tool (Survey >> Field Book >> Import) currently imports all the MicroStation features in the active .dgn to survey features. This idea is a request to enhance the Graphics tool (Survey >> Field Book >> Import) ...
11 months ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Needs review

Point Code and number included in the regression points

The point code and number should be included in the regression points so that it can be printed out and identified when you make a regression report. If you only see the stationing and offset from the geometry you cannot separate normal track poin...
5 months ago in OpenRail Designer / Regression Analysis 0 Needs review

rotate cells placed by field book

We need to be able to manually rotate survey cells in a 3D file. Yes, I understand there are macros to automate this. But simply put, we should be able to use the microstation rotate command and have the cell respond.
over 1 year ago in OpenRail Designer / OpenRoads Designer / Survey 9 Needs review

Break decks into sections

Usually, the bridge deck of a precast beam is an integral unit per span. In actual construction, the bridge deck may be constructed in sections for each beam. Is it possible to break the bridge deck into sections for each beam, and further divide ...
about 2 months ago in OpenBridge Modeler 0 Needs review

Turnout profile elevation in reports

We need the ability to get the profile elevation from the turnout points to the turnout report.
8 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review