Need bent plate connection plates for diaphragm and cross frames.
OBM does not currently allow for bent connection plates for diaphragms / cross frames. We need that ability to cover bridges skewed between 20 and 45 degrees.
Location of embedded battered piles set at bottom of footing
Currently, for abutment and piers, when battered piles are used in combination with an embedment length, the pile location is set based on top of pile not the bottom of footing. When users input pile spacings into the pile layout dialog, it is not...
Ability to plot CPT data in OpenRoads from OpenGround
Our partner Dataforensics has a project with an OpenGround user, HDR where they need to plot borehole data and CPT data in OpenRoads. Seems like they were able to do this in Civil3D but are now using ORD and want to do the same as the attached
Currently 3D elements that are curved are rendered with a series of line segments. While this might be okay for some applications, it makes the 3D model very unhelpful for plans production (i.e. you cannot dimension radii of curves). We need the c...
I've found that variable constraints are highly effective when support lines are perpendicular to the alignment. However, when a skew is introduced to these support lines, a variable constraint continues to function perpendicular to the alignment ...
It would be great if we could control the vertical end cut orientation of the concrete girders: Normal (as is) and Vertical (plumb to the world). Also, we often have to clip the corners of girders when bridges are on heavy skew. Would be nice to b...
Option to define only a single beam in the Beam Layout
Currently OBM requires atleast two beams in the beam layout. Users working on bridge expansion projects, or with rail bridges have requested allowing bridges with a single beam.
0
Planned