Our bridges are designed with a haunched (or angled) soffit at the outside edges of the deck. These extend from the outside edge of the deck down to the top of the outside girder flange. Right now, this can be fudged in a deck template on a straig...

Having the ability to quickly check both existing and design crossfall/superelevation would increase efficiency within the program as there would be no requirement to run a template and report to evaluate existing cross slopes

I know parametric constraints can be exported but if a corridor becomes corrupt then being able to rebuild it from scratch easily would be useful. Similar to an input file in MX

I'd like a tool that synchronizes all template drops in all corridors in a file, right now they have to each be manually selected in the explorer or on screen.

It would be very helpful to be able to put in different spacing for the shear stirrups than for the shear connectors between the beam and deck. I know older standard detailing had these all as one bar so the spacing would always be the same. Howev...

I propose to add the possibility of dividing corridors with the retention of all attributes and elements such as point controls, feature definitions, keystations, etc. It can be seen in the programme files that such an intention to introduce a fea...

In the previous Bentley software our DOT used, the software was able to connect the cut and fill lines when transitioning from cut and fill between template drops. Currently the only way that is possible is to have a feature name override on the c...

Add the ability to target survey Feature Definitions with Horizontal Feature Constraints on Points within Templates. There is a deliverable required on surveyors to show cross sections of their surveyed surface where sections within the surface ha...

As a Highway Designer I want the Corridor Objects-Point Control window to include a column in the table that shows which point is being controlled so that I can sort based on that point name to quickly determine which point controls applied to tha...

in InRoads ss2 the interface would display the point control and parametric constraints with red or blue of there stationing used to control a point overlapped another entry or extended beyond the limit of the alignment. This was a helpful visual ...