Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

Modeling

Showing 198 of 1327

Import and Export ITL templates from and to Microstation

In InRoads there was the ability to import templates from Microstation. This enabled complex shapes that were drawn in CAD to be used in templates.
about 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Already exists

Simplify Civil Cell tool

Civil cells contain horizontal and vertical geometry. In practice, typically the vertical design is unique for each placement instance of design features that could utilize civil cells, even though the horizontal geometry is similar or varies para...
about 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Already exists

Ability to save frequently used slopes in the "create slope to target" tool dialogue.

It would be very helpful if we could save our frequently used slopes to a pull down list in the "create slope to target" tool dialogue. Currently you have to type in your desired Cut and Fill slopes every time you use the tool. It would be much be...
over 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Template Library - List Points and Components without Feature Definitions

In the Active Template pane of the Template Library, we are able to see Point Feature Definitions and Component Feature Definitions that have been assigned. However, we are not able to easily see all Points or Components which have no Feature Defi...
about 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Already exists

Create corridor without vertical

Having the ability to create a corridor without needing a vertical can be helpful when a project involves widening. With widening, I wouldn't need a profile along the CL, but instead it would be along the EOP. Point controls can be used to attach ...
about 1 year ago in Modeling / OpenRail Designer / OpenRoads Designer 0 Future consideration

Allow for components volumes to be added to unclassified cut or fill volume

This would allow for users to include the backfill volume and obtain one set of cut/fill volumes. The current process requires the user to manually add the backfill volume. One example of this is in the case of a retaining wall and the fill that...
almost 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Allow member groups to start and stop at the same support line in LBS

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
about 1 year ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Add ability to delete multiple template point's constrains at once while editing the Transition Midpoint

While editing the Transition Midpoint, we need to delete both the constraints of multiple template points. currently we can delete the constrains of point one at a time. This can become tedious process when there are lot of points of which both th...
almost 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Create corridor from reference feature

Our current standard workflow for roadway corridor modeling is to create a pavement corridor then a corridor for each end condition Rt and Lt. I have seen many others including some Bentley folks use this method. It would be big time saver to have...
almost 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer 2 Future consideration

Use GAGE instead of Center of Railhead for Template Placement when Creating Rails

The "Create Rails" tool utilizes the Rail Settings within the Design File. The gage lines are generated correctly based on the file settings, and so are the center of rail head lines, BUT these do not necessarily match the Template that is used to...
over 1 year ago in Modeling / OpenRail Designer 0 Future consideration