Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

Analytics

Showing 19 of 1359

Add temporary/permanent button on civil analysis tool for placing graphic elements, or at least make them a graphic group to make removing them easier and more complete.

When I use the civil analysis tool, I sometimes place the displayed graphics (elevation, contour, triangle) into the drawing to have a record. The problem is when I am done with the graphic and want to remove them, I have to select each component ...
23 days ago in Analytics / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Fiber Mesh Cross Sectional Analysis

Con sider adding fiber-mesh tools for cross section analysis to RMBRIDGE. This allow the use of different materials in the cross section. This is important in seismic analysis for the definition of the Moment-Curvature properties. This feature is ...
about 1 month ago in Analytics / OpenBridge Designer 0 Needs review

Use Analyze Point Tool in Sheet/Drawing Models

We need to be able to track alignment data to check sheet annotation. Would be very helpful to have an easy way to do this in sheets. Since an alignment or terrain would still need to be selected, the sheet scale shouldn't matter. This would work ...
over 1 year ago in Analytics / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

PMM non-linear springs

We would like to ask a PMM non-linear spring for modeling Plastic Hinges for reinforced-concrete Columns. This PMM springs are used for modeling the Moment-Rotation (M-R) behavior for different axial loads (P). The PMM spring should be able to cap...
26 days ago in Analytics / OpenBridge Designer 0 Needs review

Have Sight Visibility Lines also created as 2d Geometry so users can visually inspect/present failures

Currently sight distance analysis results are purely 3d extended objects that only offers a limited amount of functionality to determine visually why a failure is occurring. Adding 2d geometry representation to these objects would allow users to p...
over 1 year ago in Analytics / Modeling / OpenRail Designer / OpenRoads Designer 0 Future consideration

Draw Clear Zone Tool in Plan/3d

Draw Clear Zone tool in Plan/3D that reads from AASHTOW roadside design tables for offsets and slopes from the model.
over 1 year ago in Analytics / OpenRoads Designer 4 Future consideration

Temporary Dimension Lines in XSection Views

Currently in the XSection viewer in OpenRoads Designer if you have a corridor or linear template that touches our butts up against another corridor you can't place temporary dimension lines on those components to make measurements if the linear or...
over 1 year ago in Analytics / Modeling / OpenRail Designer / OpenRoads Designer / Reports 0 Future consideration

Facilitate successive volume calculations

Currently the simple calculation between 2 3D models is summarized between 2 comboboxes with a visual choice in a list of 3D models. If we have 60 models it becomes very difficult to make choices because the palette disappears after each calculat...
12 months ago in Analytics 2 Future consideration

Analyze Pavement Smoothness Assurance/Ride Quality. ProVal equivalent analysis.

QAQC tool to analyze pavement smoothness/ride quality of models. This would help verify model density is appropriate for paving use, verify design intent. The goal is to simplify the process and have any easy method to analyze pavement from both i...
over 1 year ago in Analytics / OpenRoads Designer 0 Future consideration

Native Dynamic Alignment Tables

If I create an alignment, and I want that information as a data table (for curves and the like) it's not directly possible. I want it to create a table where I can pull the properties of that alignment off and put them into a table format. The def...
almost 2 years ago in Analytics / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration