Allow modeling of Pier Segments with different cross section
For Segmental Bridge Modeling, Pier caps segments typically have diaphragms built in and are a different cross section than the other typical segments. OBM should allow this to be modeled.
Allow member groups to start and stop at the same support line in LBS
We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
Place one bearing at pier location for continuous span concrete girder bridge design
Ability to place only one bearing at pier location for continuous span concrete girder bridge design, two girders shearing one bearing at pier location.
The ability to edit the positioning and placement of a dimension.
Once a dimension is placed, it seems to be set. The ability to place a dimension and then later be able to adjust it would be tremendous. Not only the ability to adjust the placement of the dimension, but the ability to adjust the placement of the...
Include common support structure types used in the UK
It would be good to add to the OBM library, for example standard abutments types used in the UK that are not integral and need an abutment gallery to align with the CIRIA C543 Bridge detailing guide.
I would like to create a generic curb for airborne lidar extraction with a 0.5 ft vertical offset from the gutter to the top of curb and then a 0.5 ft horizontal offset from the top of curb to the back of curb. I would want to collect the gutter a...
0
Needs review