Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

OpenRoads Designer

Showing 752

Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves

In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
over 1 year ago in OpenRoads Designer 0 Future consideration

Creating Generic Curb Offsets

I would like to create a generic curb for airborne lidar extraction with a 0.5 ft vertical offset from the gutter to the top of curb and then a 0.5 ft horizontal offset from the top of curb to the back of curb. I would want to collect the gutter a...
almost 2 years ago in OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Future consideration

Geometry Builder Interior Angles

We often get plats that have interior angles and distance for the parcels, tracts, etc. It would be nice if this option was in geometry builder.
11 months ago in Geometry / OpenRoads Designer 0 Future consideration

Create corridor without vertical

Having the ability to create a corridor without needing a vertical can be helpful when a project involves widening. With widening, I wouldn't need a profile along the CL, but instead it would be along the EOP. Point controls can be used to attach ...
11 months ago in Modeling / OpenRail Designer / OpenRoads Designer 0 Future consideration

Update "Coordinate Grid" tool to allow more options

The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...
12 months ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Text Favorite Naming

When an Annotation Definition is created in some cases it's useful to assign a text favorite to the annotation definition.....except for when you have text favorites with the same name. It would be nice if we could name text favorites with the sam...

Generate Report of Construction Pipe Lengths, Start-Stop Station, and Offsets based on Keymap

Would like to utilized Asset Manager or a similar tool to quickly obtain quantities for drainage structures, namely pipes, based on a keymap. The idea is to feed the tool a keymap file, a file containing shapes representing each sheet, the tool us...
12 months ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Civil Labeler from Corridor - Maintain Label when corridor feature definition changes

Right now, if we set a corridor feature definition to "Top Mesh" only display and then label that mesh with civil labeler, the label will break if we change the corridor feature definition again. This makes it hard to use the civil labeler with a ...
about 1 year ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Put the DEPTH point type back in the survey import

In InRoads there was an option to import data as depths instead of elevations. This is common practice for hydrographic data, as many dedicated programs have positive elevations being below 0, with elevations above as negatives. ASCII files can be...
about 1 year ago in Import/Export / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Add support for Points/ Zero length elements using "Create 3D by Drape" tool

Currently "Create 3D by Drape" tool does not support point elements/ zero length elements. The modify point and drape element tool also does not work for zero length elements. Kindly add the support for zero length elements in "Create 3D by Drape ...
about 1 year ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration