I sometimes have to look at another user's Corridor file to get additional details. If I reference in their file or open it read only, I'm not able to open up Corridor Objects to see what template they are using. It would be useful to allow me to ...

Currently we can set up one spiral type for one DGN. If the geometry needs to be designed using different spiral type, we need the flexibility to allow the application of multiple spiral type in one DGN

In Bentley Rail Track, there was an extension called Pro Rail that allows users to measure the interval between rail dynamically. Right now, we are able to report that using Station-Offset report but we are not able to track it which makes it chal...

When geometry is created using the Horizontal Offset Tools, if the geometry is controlled using Civil Accudraw snaps this is not reflected in the Properties Tab for start and end points. This makes adjusting the Civil Accudraw snaps difficult, suc...

If I have a pipe and I need to cut a cross section along the pipe, And that pipe has a bend in it, I can't use the 2 point method, I need one that allows for bends and twists and turns. If the annotation is based on the type/purpose then swapping ...

We need better access and configuration for this constant. There is no place to set this constant.

It will be helpful to see where the clipping is coming from. Example if reference file then would be helpful to know what reference file

There is a setting that can be turned on in Power InRoads V8i that keeps open a “results dialog box” that records all actions completed. It gives very basic information that we save as text file. The text is then imported into a Word document temp...

Once stored, it will keep track of which levels are turned on and off at the time of pressing stored. Then pressing restore will return the levels back to what they were. This would be useful if you needed to turn off some levels but want to retur...

Auto process multiple corridors and linear templates within DGN simultaneously