Divide shapes by area. Example: divide a closed shape producing a new shape using an area perimeter like east 2 acres of the shape or the south 4 acres of the shape.

Geometry/Lines requires you to enter the bearing value as S45d30'30"E which is way too many key strokes and unproductive. Geometry Builder allows us to enter the same bearing using the quadrant method (245.3030) which is much faster/easier and ali...

This addition would allow a truck other than the AASHTO Fatigue truck to be checked for the fatigue load case when the design criteria require a different truck. Currently, it is NOT possible to check the fatigue load case for a live load other th...

Unlike the OpenRoads v8i functionality for this tool, Plan by 3D Element does not create Geometry that has an Active Profile and therefore can't be used for the majority of functions users want by default, namely Point Controls (in ORD and OBM Dec...

Unlike many of the civil tools, the Set Feature Definition tool does not have an option to use active feature definition. This tool is commonly used with Match Feature Definition, which sets the active feature from selected element. Add option for...

Currently sight distance analysis results are purely 3d extended objects that only offers a limited amount of functionality to determine visually why a failure is occurring. Adding 2d geometry representation to these objects would allow users to p...

We need an Expression that gets the offset of the center of a component in the 3D model. Currently it is getting the offset from the closest point in the component. When the component is away from the alignment, this is acceptable, but if the comp...

Need to be able to dimension Surface templ ates in the dynamic cross section view during design as well as XS Drawing Models for plans productions. Could do it in InRoads.

When is Open Bridge/Leap going to be updated to the AASHTO LRFD 10th Edition? Our D.O.T. is requiring all design to be with the 10th edition.

This would allow for the phrase option inserts to use calculated values. Currently some phrases that we want to create as a phrase option have calculated values, but some do not.