The ability to import Cant values from an Excel Spreadsheet, CSV file, etc.

Suggest making California design for abutments on LEAP to follow this Live Load Distribution memo. All abutments in California must be designed using the following Live Load Distribution method or it would not be acceptable per Caltrans standards....

MnDOT wants to start using wider 3-digit sizes (22.5"x18", 30"x24" & 45"x36") for some of the county shields within the Minnesota standard in OpenRoads SignCAD. The wider 3-digit sizes are needed for the M1-6M and M1-6a blue pentagon county sh...

Hello. We're building a tunnel and need OpenTunnel to be able to compare the actual data from the constructed tunnel (recorded via scanning) with the theoretical data from the designed tunnel corridor. There are other programs that do this: Istram...

We often need to provide volumes of additional excavation for substandard subgrade material to a certain depth. The easiest way to get this is through the Milling and Stripping functionality. You set the bottom of the component thickness and have ...

I would like to be able to apply a surface template to multiple terrain models at once, either by a previously-selected selection set, or by selecting one or more terrain models within the tool itself. In the attached image I would like to apply t...

If I create an alignment, and I want that information as a data table (for curves and the like) it's not directly possible. I want it to create a table where I can pull the properties of that alignment off and put them into a table format. The def...

It can come situations, especially in investigations, when you need to break a complex alignment i two because several reasons as change number of tracks or decisions of other design of a railyard/shut yard. Today we have to break the complex whic...

Provide a tool to quickly create infield gradings. When creating infield gradings, often we only to include part of a geometry element instead of the entire element. Because the terrain from element tool doesn't have the option to only import part...

If we project the profile runs to centerline, we lose the ability to show the utility crossings generated by the 3D cut at the pipe centerline. We can add a 3D cut at the road centerline, but often the crossing utilities are not in the same locati...