Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

RM Bridge update to use the correct AASHTO reduction factor for reinforced/prestressed concrete based on tensile strain in reinforcing at ultimate limit state.

The current RM bridge ultimate capacity calculations allow for material reduction factors only, which are not used by AASHTO for reinforced and prestressed concrete. AASHTO concrete reduction factors for flexure and P-M capacities are based on the...
over 2 years ago in OpenBridge Designer 0 Needs review

Use Annotation Groups to add Hatching / Pattern elements and Dimension Elements

We have several sheets where we want certain lines that have specific feature definitions to have a dimension on the plans. We also have several shapes that we always want to show hatching or patterns appearing on the plans. Right now we have to m...

Field with station range of named boundary

It would be great if we could create a field (text favorite) that would label the station begin and end of a named boundary for an index of sheets layout.
over 3 years ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Add option for rounding corners when using the "Geometry Offsets and Tapers" Tool

With regular MicroStation lines, when using the "move parallel" tool (Offset), there is an option to choose "Round" which creates rounded corners for the offset line. There should be a similar option when using the ORD Tool "Offsets and Tapers." C...
over 3 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Model horizontal cross bracing for steel girder bridge

Current OpenBridge Modeler version don't have ability to model horizontal cross bracing.
about 4 years ago in OpenBridge Designer / OpenBridge Modeler 0 Future consideration

Add loading options in LEAP Concrete (Previously known as RCPIER)

Provide an option to enter girder properties for both the back span and fwd span if varying girder properties between back and fwd span When generating moments due to braking force, provide an option that distributes the moment divided by 10 and a...
over 2 years ago in OpenBridge Designer 0 Future consideration

Automatic/batch update of Profile 3D cut

This won't update immediatly when the 3D model is updated. This means that when going to plan production, all profiles needs to be refreshed.
about 4 years ago in Geometry / OpenRail Designer / OpenRoads Designer 3 Future consideration

Possibility to add/remove/change long sleepers sets

Possibility to add/remove/change length of long sleepers sets in turnouts that are placed in a geometry. When you are working with existing geometry and there are turnouts with too long sleepers sets or if you by mistake place a turnout that has a...
over 1 year ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Ability to Hide & Isolate all elements belonging to specific Corridors/Linear Templates

In Openbridge you can untick a Bridge in Explorer and it will hide that bridge in both 2d and 3d models. In OpenRoads, this functionality is very much needed for Corridors and Linear templates (similar to what we have for Feature Definitions). We ...
about 4 years ago in Modeling 1 Future consideration

Profile Superelevation annotation based on Crossfall to a Linear feature

For almost all our projects we require very precise crossfall transitioning at tie-ins to existing and situations at ramps where we project crossfall from one carriageway to another. It is not practical for us to report crossfall and copy the valu...
about 4 years ago in Drawing Production 0 Future consideration