Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

Bring back "Create Geometry by Template" command

In the first versions of OpenRoads we had the tool "Create Geometry by Template" which would create ruled geometry from a template . Fast way to for lay out geometry for a project. Not sure why it went away.
almost 4 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 3 Future consideration

LIFT vrs slew report

Hi would be very helpful to get a lift vrs Slew report at set chainages along an alignment. This would help the designer see if they are designing enough lift in the track to achieve the slews, without going to the drawing production stage
almost 4 years ago in OpenRail Designer / Regression Analysis 0 Future consideration

Enhance Design Standards to flag gaps in Geometry & apply to Feature Definitions

Additional functionality is needed for Design Standards to be fully functional for project delivery. Some additional thins include: Allow Design Standards to be optionally assigned to Alignment Feature Definitions so Alignments are created with th...
almost 4 years ago in Geometry / OpenRail Designer / OpenRoads Designer 0 Future consideration

Allow "Create 3D By Slope To Target" 3D element to be dropped (exploded) to regular 3D Smartline

If you create a 3D slope line using the tool "Create 3D By Slope To Target" the result becomes an intelligent line dynamically linked to the horizontal/vertical geometry which is great, however, there are times when we would like to be able to qui...
over 1 year ago in Modeling / OpenRoads Designer 0 Future consideration

Civil Labeler - XS Label height difference between centerline and curb or other key-point

We need ability to label height difference between centerline and curb or other key-point in our type XS. Or ability to label curb or other key-point height relative to centerline.
about 3 years ago in Drawing Production / OpenRail Designer / OpenRoads Designer 0 Future consideration

Support UNC paths and writing a conditional in the OrganizationSetting.cfg file

MnDOT would like to set a network location for the standard libraries. This way every user gets the current design. OpenRoads SignCAD does not currently support UNC paths or writing a conditional in the OrganizationSetting.cfg file. It seems illog...
over 2 years ago in OpenRoads SignCAD 0 Future consideration

Add profile annotation location option for annotating conduit description only once

If a conduit is perfectly straight, then it is easy to put the description once in the middle, but if the conduit has any bends then each segment gets annotated. Adding an option for annotation frequency with location controls would fix this.
almost 4 years ago in Annotation / Drainage and Utilities / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

End Conditions automatically include an interval at the point in which cut/fill meet.

I'm surprised ORD doesn't automatically include an interval at the point in which cut slope becomes fill slope or vice verse. MX did a great job at this but without this function earthwork slopes aren't correct and give strange results. It's not p...
about 3 years ago in Modeling 1 Future consideration

Overlap detection in Corridor Objects

I noticed that template ranges can overlap and there is no obvious indication that this is occurring. Ideally over lapping station ranges should highlight in red to draw attention to it.
about 3 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

One button downgrade and export

While we are in a transition phase between the old v8i to the ORD dgn files, we sometimes receive files in the wrong dgn format. The steps to downgrade to a v8i backwards compatible file involves too many steps and introduces units and coordinate ...
almost 4 years ago in Import/Export / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration