Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

Create a tool for parametric turnout tie placement, with specific ties and spacing

The idea is similar to parametric civil cell: we need a tool to place the ties along the turnout. The ties must be of different lengths, placed at different spacing, and must follow the alignments from and to specifically identified points. The ti...
7 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

defining dynamic vehicle envelope for rail vehicles: need missing parameters

when creating dynamic vehicle envelope (strangely called coach sweep), the methodology does not reflect the vehicle outlines. Passenger carriages and most locomotives have tapered nose configuration which drastically reduces dynamic envelope. Curr...
7 months ago in Modeling / OpenRail Designer 1 Needs review

Check Civil Integrity Tool

Provide a user-friendly check integrity tool for dgn files. This tool should show users any potential issues and give them the option to fix it.
over 3 years ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Set Minimum and Maximum Cover Constraints to the Conduit Catalog, not the Prototype

Pipe standards vary their minimum and maximum pipe cover values based on the size of the pipes. There needs to be an ability to set this per conduit size so that when running a design you can consider these different cover depths. As of now, you w...
about 1 year ago in Drainage and Utilities / OpenRail Designer / OpenRoads Designer 0 Future consideration

Slope to Mesh - "Create 3d Line By Slope to Terrain" to include Meshes

Update the the "Create 3d Line By Slope to Terrain" to include slope to Mesh. This will allow users to grade to 3d meshes created by linear template components and corridor components. Currently if I want to daylight to a corridor mesh with this c...
almost 4 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

implement Canadian CSA S6 standards in Leap Bridge Steel and make a tutorial with it

implement Canadian CSA S6 standards in Leap Bridge Steel and make a tutorial with it We need 3 tutorials to apply Canadian CSA S6 standards in 1. Leap Bridge concrete, 2. Leap bridge steel and 3. RM bridge with "canadian" steps.
7 months ago in OpenBridge Designer 0 Future consideration

Enable Canadian CSA S6 Design Standards in LEAP Steel

Currently, the LEAP Steel module only supports AASHTO design standards, whereas the LEAP Concrete module allows users to select both AASHTO and Canadian CSA S6 standards for structural design. This limitation represents a significant issue for our...
7 months ago in OpenBridge Designer 1 Future consideration

Rectangle feature

Openroads Horizontal Geometry has lines, arcs, and circle features. Add a rectangular civil geometry element. This would be used for site grading (building pad), instead of drawing 4 individual civil geometry lines and complexing together, a recta...
about 1 year ago in Geometry / OpenRail Designer / OpenRoads Designer 0 Future consideration

Terrain Breakline Priority

Ability to control breakline priority in a terrain. Allow for more than 2 types of breakline priorities other than normal and soft breaklines.
4 months ago in OpenRoads Designer / OpenSite Designer / Terrain 3 Future consideration

Retain Observations When Skipping Duplicate Points During Survey Import

During survey traverse workflows that span multiple days, users must import several raw data files into a single field book. Often, points established on a previous day are re-observed as backsights on subsequent days. Currently, the conflict reso...
4 months ago in OpenRoads Designer / Survey 0 Needs review